Two systems, one quality

We manufacture both lines to your individual requirements – as a rooflight or roof dome, with ventilation, smoke extraction and protective features.

Continuous rooflight

STARLIGHT HS

Large-area rooflight solution for long, flat industrial roofs.

STARLIGHT HS continuous rooflight with SHEV flap and fall-through grilles
SHEV fitting, double flap

Opens when it matters.

SHEV flaps release smoke in the event of fire – maintaining low-smoke layers and safe escape routes, fully to standard.

Rooflight with PC-2 protection and double flaps

Protected in every detail.

Double flaps, PC-2 impact protection and fall-through protection to GS-18 – safety comes as standard, not as an afterthought.

Various installation positions

Fits any roof.

Curved, saddle or shed, with flexible installation positions – up to 6 m wide and practically unlimited in length.

Equipment & technical data

Ventilation flaps 24 V / 230 V SHEV flaps Fall-through protection (GS-18) PC-2 impact protection Double flaps Single-skin / multi-skin Colours: opal or clear Perforated-sheet protection Insect screens Fall protection Wind deflectors Ventilation unit Snow-load adaptation Wind & rain detection
Width
Up to 6 m
Length
Unlimited
Type
Curved, saddle, shed
Fire class
B1, meltable to DIN 18230
Colours
Opal, clear
Flaps
Fixed, ventilation flaps 24 V / 230 V, SHEV flaps
Fall-through protection
Optional, GS-18
Sound insulation
Up to 29 dB
U-value
Up to 1.01 W/m²K

Two systems. One standard of quality.

Designed, manufactured and installed by a German family business.

Roof dome

STRATO HS

Precise spot daylighting for any flat roof – the original.

STRATO HS roof dome with dome, kerb, fittings and fall-through grille
Dome with SHEV fitting and oil-pressure damper opened

Opens for air and smoke.

Openable with a 230 V actuator or as an SHEV unit to DIN EN 12101-2 – with a robust SHEV fitting and oil-pressure damper.

Roof domes with perforated-sheet protector against hail

Hail? Bounced off.

The perforated-sheet protector shields against hail and heat – tested at the Hail Research Laboratory Reutlingen with 20 mm at 288 km/h.

DARK COVER blackout flap with aluminium sheet

When it has to be dark.

DARK COVER makes the dome completely light-tight – ideal for production, storage or light-sensitive processes.

Equipment & technical data

Perforated-sheet protector (hail & heat) DARK COVER (light-tight) GRP upstand kerb (insulated) Steel-sheet upstand kerb Stairwell smoke extraction Fall-through protection (GS-Bau-18) PPE fall-arrest anchor (DIN EN 795) Open/closed & intrusion sensor Wind/rain sensor control Anti-condensation equipment Frost monitor Roof-access equipment
Type
Fixed, openable with 230 V actuator, SHEV unit to DIN EN 12101-2, SHEV + 230 V actuator
Glazing
Plastic, slightly domed
Fire behaviour
B s1 d0 (DIN EN 13501-1) ≙ B1, meltable
Heat extraction
HE to DIN 18232
U-value
1.4 W/m²K (optional 1.0)
g-value
< 30 %
Standard sizes
600 × 600 to 1800 × 2500 mm, custom sizes available
Upstand kerb heights
150 / 300 / 500 mm
Smoke extraction
Opening per MIndBauRL, SHEV to DIN EN 12101-2
Hail test
Hail Research Laboratory Reutlingen (20 mm, 288 km/h)

Data sheets to download

The right system for your roof?

We advise you and manufacture to measure. Tell us about your project.

Enquire now